Answers are grounded in this paper and cite their sources.
The authors have fabricated and characterized thin film YBa 2 Cu 3 O 7 step-edge microbridges for application in SQUIDS. Epitaxial YBCO films were pulsed-laser-deposited on SrTiO 3 and had T c 's of 88-90 K. Sharp steps in SrTiO 3 were obtained by photolithographic techniques and Ar ion milling with step heights (h) between 100 and 250 mm. They investigated step-edge junctions (SEJ) with different film thicknesses (d) from 100 to 250 mm but with a constant ratio d/h=1. The width of the microbridges was 2-2.5 mu m. The T c 's of the bridges were 65-85 K, depending on film thickness and the duty cycle during ion milling. The I-V curves were RSJ-like and clear Shapiro steps were observed. The junction normal resistance was independent of temperature. With applied magnetic field the critical current I c showed a T-dependent modulation, indicating that there was self-shielding and I c non-uniformity in the junctions. Low-frequency noise measured in RF SQUIDS was relatively low. They showed that it was generated predominantly in the junctions.
No takes yet. Share an insight, caveat, or question.
Herrmann et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: