Answers are grounded in this paper and cite their sources.
An automatic gain control amplifier is described which is designed to correct for fluctuations in the light source of a recording spectrofluorometer. Means are also provided for correcting for the spectral response of the spectrofluorometer components. Two input signals to the AGC amplifier, one the fluorescent signal S2, and the other a reference signal S1 (which senses the light source variations present in S2), are obtained by use of a conventional beam splitter. Variations in S1 cause corresponding changes in gain A in such a way that the output voltage of the AGC amplifier is proportional to the quotient S2/S1. Thus, common variations in the input signals are canceled. Test results show that the instrument corrects for variations in light intensity as high as 20% with less than 1% error. Small step variations in light intensity, typically 10% or less, are corrected for within 200 msec.
No takes yet. Share an insight, caveat, or question.
Eisenberg et al. (1962) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: