Effect of reinforcement on the mechanical and thermal properties of flax/polypropylene interwoven fabric composites

Flax yarn and polypropylene yarn were used as weft and warp, respectively, for producing interwoven fabric. Unidirectional flax fiber-reinforced composites with different fiber orientation such as (0) 6 , (45) 6 , (60) 6 , (90) 6 , and (0/90)s were fabricated by hot pressing method. The effects of different angle orientation such as parallel, off-axial, and cross lamination on tensile, flexural, and impact energy of unidirectional flax yarn composites were studied. Thermal behavior of fiber and composite was observed by thermo gravimetric analysis and differential scanning calorimetry. Tensile, flexural, and impact value of the composites are showing the decreasing trend for off-axial laminates compared to (0) 6 axial-oriented laminates. Tensile and flexural strength values of (0) 6 laminates are showing the maximum value such as 71 and 79 MPa, respectively. But, flexural strength value of ((0/90)s cross-ply arrangement is showing the reasonable value compared to off-axial lamination such as (45) 6 , (60) 6 , and (90) 6 layup combination. Maximum impact energy value is observed around 334.66 J/m for (0) 6 axial-oriented laminates. The influence of interwoven fabric on the processability of the composite fabrication is explained in detail. Fractography studies of the damaged surface are also demonstrated.