Answers are grounded in this paper and cite their sources.
The steady-shear rheology of polystyrene−polyisoprene (S/I) block copolymer melts having a body-centered-cubic (bcc) morphology has been characterized as a function of applied shear stress. At temperatures below the order−disorder transition (ODT) and at low stresses (τ < 100 Pa), both diblocks and triblocks manifest finite but extremely large (η 0 = 10 7 −10 8 Pa·s) zero-shear viscosities. Small-angle X-ray scattering (SAXS) measurements indicate that at these low stresses the bcc lattice remains intact. This Newtonian region ends abruptly when a critical shear stress is reached (τ c ≈ 200 Pa), the steady shear viscosity decreasing by almost 4 orders of magnitude with only a factor of 3 further increase in stress. The viscosity then enters a weakly shear-thinning regime very similar to the behavior of the same block copolymer above its ODT temperature. As shown by SAXS, there is no lattice order in this high-stress regime, indicating that “shear-disordering” has occurred. If the disordered polymer is held fixed or subjected to a low stress (τ < 100 Pa), it gradually regains its original equilibrium state, following the same kinetics as after a thermal quench from above to below the ODT temperature.
No takes yet. Share an insight, caveat, or question.
Sebastian et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: