Answers are grounded in this paper and cite their sources.
This paper presents a noncontact human-machine interface which is capable of sensing and indicating the position of a human hand that is approaching a probing coil. High sensitivity is achieved by utilizing a structure including two oscillators and a mixer to compare and extract the electromagnetic shift between two probing coils. The probing coils chosen in this system have a planar structure and small size, which can be easily built on a printed circuit board or integrated into a portable device for hand detection. The hand-coil interface is analyzed quantitatively for both the inductive and the capacitive links. Based on the analysis, a circuit model for the hand-coil interaction is presented. The proposed sensing circuit was built on an evaluation board with two commercial planar coils. A small phantom was used to imitate the hand electrical characteristic for a reliable and repeatable experimental setup. The measured results showed a hand-detection sensitivity of 10 kHz/mm at the output of the mixer stage and 30 mV/mm at the final output of the proposed interface.
No takes yet. Share an insight, caveat, or question.
Xiao et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: