Answers are grounded in this paper and cite their sources.
The kinetic inductance detector (KID) is an exciting new device that promises high-sensitivity, large-format, submillimetre to x-ray imaging arrays for astrophysics. KIDs comprise a superconducting thin-film microwave resonator capacitively coupled to a probe transmission line. By exciting the electrical resonance with a microwave probe signal, the transmission phase of the resonator can be monitored, allowing the deposition of energy or power to be detected. We describe the fabrication and low-temperature testing, down to 26 mK, of a number of devices, and confirm the basic principles of operation. The KIDs were fabricated on r-plane sapphire using superconducting niobium and aluminium as the resonator material, and tantalum as the x-ray absorber. KID quality factors of up to Q = (741 ± 15) × 103 were measured for niobium at 1 K, and quasiparticle effective recombination times of τ*R = 30 µs after x-ray absorption. Al/Ta quasiparticle traps were combined with resonators to make complete detectors. These devices were operated at 26 mK with quality factors of up Q = (187.7 ± 3.5) × 103 and a phase-shift responsivity of ∂θ/∂Nqp = (5.06 ± 0.23) × 10−6 degrees per quasiparticle. Devices were characterized both at thermal equilibrium and as x-ray detectors. A range of different x-ray pulse types was observed. Low phase-noise readout measurements on Al/Ta KIDs gave a minimum NEP = 1.27 × 10−16 W Hz−1/2 at a readout frequency of 550 Hz and NEP = 4.60 × 10−17 W Hz−1/2 at 95 Hz, for effective recombination times τ*R = 100 µs and τ*R = 350 µs respectively. This work demonstrates that high-sensitivity detectors are possible, encouraging further development and research into KIDs.
No takes yet. Share an insight, caveat, or question.
Vardulakis et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: