Answers are grounded in this paper and cite their sources.
Direct numerical simulations were performed to investigate the effect of severe contamination on interfacial gas transfer in the presence of isotropic turbulence diffusing from below. A no-slip boundary condition was employed at the interface to model the severe contamination effect. The influence of both Schmidt number ( $Sc$ ) and turbulent Reynolds number ( RT ) on the transfer velocity ( KL ) was studied. In the range from $Sc=2$ up to $Sc=500$ it was found that KL∝ Sc-2/3 , which is in agreement with predictions based on solid–liquid transport models, see e.g. Davies (1972, Turbulence Phenomena , Academic). For similar RT , the transfer velocity was observed to reduce significantly compared with the free-slip conditions. The reduction becomes more pronounced with increasing Schmidt number. Similar to the observation for free-slip conditions made by Theofanous et al. ( Intl J. Heat Mass Transfer , vol. 19 (6), 1976, pp. 613–624), the normalized KL in the present no-slip case was also found to depend on RT-1/2 and RT-1/4 for small and large turbulent Reynolds numbers, respectively.
No takes yet. Share an insight, caveat, or question.
Herlina et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: