Answers are grounded in this paper and cite their sources.
A high-strength, corrosion-resistant alloy is described. This alloy, ACI type CD-4MCu, which is predominantly ferrite, possesses corrosion resistance equal to or better than that of austenitic stainless steels. High strength and corrosion resistance are obtained for the alloy in either the solution-annealed or aged condition. High resistance to stress corrosion cracking and pitting by chloride environments is also inherent in this alloy. ACI cast alloys of the 19 Cr-9 Ni types, CF-3 (low carbon), CF-8 (normal carbon), CF-3M (low carbon, molybdenum bearing), CF-8M (normal carbon, molybdenum bearing) and CF-8C (normal carbon, columbium stabilized) containing from 0 to 44 percent ferrite in the austenite matrix are discussed with respect to corrosion resistance. Laboratory corrosion data from a number of environments are reported. Data are presented illustrating a marked increase in resistance to chloride stress corrosion cracking and improved mechanical properties with increasing amounts of ferrite in the alloys.
No takes yet. Share an insight, caveat, or question.
Flowers et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: