This is the authors' abstract. We don't add key points for this paper.
• Cascade ZMS adsorption achieved an average CO₂ capture efficiency of 88% • Water-facilitated CO₂ capture enhanced adsorption under ambient conditions • The CCS prototype operated at low energy consumption of 129.4 kJ/mol CO₂ • Cascade configuration enabled stable stage-wise CO₂ concentration reduction Electricity demand remains a key barrier to scalable carbon capture and storage (CCS), while energy reporting for adsorption-based prototypes is often inconsistent across operating conditions. This study targets decentralized emission control in built environments (e.g., small engines and local exhaust sources) by evaluating a low-energy, open-air CCS prototype based on a four-stage cascade Zeolite Molecular Sieve (ZMS) 5A filter (116 g per stage; 464 g total) coupled with water-facilitated CO₂ capture. Exhaust from a 125 cc gasoline engine (50,000 ppm CO₂ inlet) was processed using a 120 W blower. The water-drop flow was optimized from 700 to 1,900 mL/min, yielding a maximum capture efficiency of 96.6% at 1,416 mL/min. Under this operating condition, five repeated trials reduced CO₂ from 50,000 ppm to 5,924 ppm, corresponding to 44,076 ppm captured and an average overall capture efficiency of 88.2%. The average electrical energy consumption was 64.88 Wh over a 0.53 h measurement window, resulting in an Energy Consumption Index (ECI) of 1.47 mWh/ppm. These results provide a transparent concentration-based energy metric for comparing ZMS cascade CCS performance and support practical development of modular low-energy mitigation technologies for the built environment.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Busaeri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: