Answers are grounded in this paper and cite their sources.
Layer-by-Layer (LbL) assembly is considered as the most versatile and robust method in thin-film fabrication. However, its use in the preparation of desalination membrane is still in its infancy. Spin-assisted layer-by-layer assembly (SA-LbL), one of the LbL variants, was selected for the fabrication of a nanofiltration membrane due to its versatility to produce an ultra-thin film with highly controlled film properties within an incredibly short time. Branched-polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) were employed and alternately deposited on the top of the ultrafiltration polyethersulfone (PES) substrate. PEI/PSS film was then crosslinked using Gluteraldehyd (GA). The resulting membrane was tested at a feed concentration of 2000 ppm NaCl, a pressure of 10 bar, and a temperature of 25°C. Crosslinking time and many layers were varied to investigate the extent of crosslinking and its impact on membrane performance. The permeation test of (PEI/PSS)10 crosslinked for 6 hours showed rejection of 94.2 % and water flux of 4.2 L/h·m2 meanwhile uncrosslinked (PEI/PSS)35 showed rejection of 75.66% only. The result showed that crosslinking improved the rejection of NaCl with a smaller number of layers. This result also displayed SA-LbL method is promising and can be used to produce membrane suitable for NF or RO application.
No takes yet. Share an insight, caveat, or question.
Farid Fadhillah (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: