Answers are grounded in this paper and cite their sources.
The structure, mechanical properties, and thermomechanical properties of poly(ethylene terephthalate) (PET) fibers obtained by laser‐heated drawing were investigated in terms of their dependence on the draw ratio and feed speed and the differences between neck‐drawn fibers and flow‐drawn fibers. The long period at a draw ratio of 6.0 reached 19.0 nm, notably larger than at lower ratios, whereas the tilting angle of the laminar structure was constant at about 60°, regardless of the draw ratio. A maximum value of 15.0 GPa was attained for the initial modulus, and 1.07 GPa was attained for the tensile strength. A higher tensile strength orientation‐induced crystallized fiber at the same initial modulus was obtained from higher molecular weight PET. The relationship between the compliance and molecular orientation of the amorphous phase was studied with a series model of crystalline and amorphous phases. The results revealed that, in the high‐draw‐ratio fibers, the compliance of the amorphous phase decreased with the draw ratio at a higher rate than indicated by extrapolation to intrinsic values.
No takes yet. Share an insight, caveat, or question.
Okumura et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: