This is the authors' abstract. We don't add key points for this paper.
A resistance random access memory device based on TiO 2 thin films was fabricated using a sol–gel spin and coating techniques. The composition, surface morphology, and microstructure of the TiO 2 films were characterized using x-ray diffraction, Raman spectroscopy, scanning electronic microscopy, and transmission electron microscopy, respectively. The fabricated Al/TiO 2 film/fluorine-doped tin oxide device exhibited electroforming-free bipolar resistive switching characteristics with a stable ON/OFF ratio higher than 300. The performance of the endurance cycling was still good after 100 direct sweeping cycles. A retention time of no less than 10 4 s was confirmed. A switching mechanism is systematically discussed based on the test results, and space-charge-limited current was found to be responsible for the switching behavior. Multilevel memory performance was realized in the as-fabricated devices. The synaptic performance was investigated by applying consecutive positive (0–2 V) and negative (0 to −1.6 V) voltage sweeps. The fabricated devices were found to exhibit ‘learning-experience’ behavior.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: