Answers are grounded in this paper and cite their sources.
If a metallic film is placed in the path of a circular beam of x-rays, the Debye-Scherrer circles obtained on a photographic plate will each be nearly uniform in intensity if the crystals are oriented at random. If the circles contain spots of greater intensity, certain crystal planes must be oriented so as to make an average angle α with the normal to the film. (1) A graphical method of determining the orientations is described, a modification of that given by Polanyi and by Uspenski and Konobejewski, together with charts of the values of α corresponding to the location of intense spots for three values of the angle β of the beam with the normal to the film, and also a table of the values for α for different planes for the cubic system. (2) Electrodeposited films of copper, zinc and cadmium were found to have crystals oriented at random, but films of iron, nickel and cobalt show special orientations. For Fe, the (111) planes tend to lie parallel to the surface; for Ni the (100) or (211) planes tend to be parallel to the surface. The orientation was less marked for Co and only slightly evident for silver. In the case of Ni, the degree of special orientation was found to increase with the thickness of the films studied (2 to 130×{}10^-4 cm) and at the same time the size of some of the crystal grains greatly decreased, reflecting more general radiation. A magnetic field had no influence on the amount of orientation. (3) Association of the effect with strain in the films. It is known that electrodeposited films are in a state of stress, presumably because of the hydrogen deposited with the metal, and that strained metals tend to have oriented crystals. It is suggested, therefore, that the orientation in this case is associated with the strain developed during deposition.
No takes yet. Share an insight, caveat, or question.
R. M. Bozorth (1925) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: