Answers are grounded in this paper and cite their sources.
We report here the synthesis and characteristics of a new C 84 adduct ([84]PCBM), realized via a diazoalkane addition reaction. [84]PCBM was obtained as a mixture containing three major isomers. [84]PCBM was tested in a fullerene/poly(2-methoxy-5-(3‘,7‘-dimethyloctyloxy)- p -phenylene vinylene) (MDMO-PPV) bulk heterojunction solar cell as the first C 84 derivative to be applied in device fabrication. Spin coating the active layer blend from 1-chloronaphthalene (the very best fullerene solvent) instead of ortho -dichlorobenzene was necessary to obtain the more efficient photovoltaic device. The PV results indicate that the hole mobility of MDMO-PPV may not be increased upon blending with [84]PCBM. This explains the relatively low I SC of the device as due to the buildup of space charge. The V OC of the device is ∼500 mV lower than that of the one with [60]PCBM, while [84]PCBM has a 350 mV higher electron affinity than [60]PCBM. This loss surpasses the linear relation between the donor HOMO −acceptor LUMO energy gap and the V OC in this type of device. A maximum power conversion efficiency of 0.25% was reached for the MDMO-PPV:[84]PCBM cells.
No takes yet. Share an insight, caveat, or question.
Kooistra et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: