Answers are grounded in this paper and cite their sources.
The corrosion characteristics of electrodeposited Ni-Mo-P alloy immersed in 5wt.% NaCl solution were investigated using immersion, anodic polarization curves, XPS and AES analysis. The corrosion rates of amorphous Ni Mo P alloys are lower than that of crystalline Ni-Mo-P alloys. Anodic polarization curve experiments show that for the electrodeposited Ni-Mo-P alloys, the nickel mol fraction of which has in between 0.719 and 0.868, the corrosion potential moves to positive with the increase of P content, and the peak current value of active region increase with the increase of Mo content in alloys, though the effects of P content on the peak current of active region and of Mo content on the corrosion potential are insignificant. XPS and AES analyses indicate that after immersion in 5wt.% NaCl solution, an oxidation film of about 50 nm in thickness is formed on the surface of Ni-Mo-P alloys. This oxidation film is composed of Ni2O3, MoO3 and PO43-, and acts as a barrier between the alloy and the electrolyte.
No takes yet. Share an insight, caveat, or question.
Zeng et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: