Answers are grounded in this paper and cite their sources.
We propose a novel lock-in-like light-detection scheme that uses a sinusoidal modulation technique of bias voltages applied to two dynodes in a photomultiplier tube (PMT). By superimposing the sinusoidal modulation signal with a frequency f on the normal bias voltage for one of the dynodes in the PMT, we can obtain a 2f-frequency component from the output of the PMT for a dc (direct current)-level incident light. This is because the gain of the PMT is also modulated with the frequency 2f. By simultaneous modulation of two dynodes separately in the PMT, therefore, we can obtain a 4f-frequency component. This fact means that we are able to detect 4f-frequency-modulated incident light by using the f-frequency dynode-modulation signal, thanks to the multiplier characteristics of the gain of the PMT. In this situation, by setting the value of the load resistor of the PMT large, we can detect the 4f-frequency signal as a dc voltage with a high signal-to-noise ratio. If we vary the phase of the modulation signal for the dynodes over that of the incident one, we can obtain the phase of the incident signal light. In such a sense, we call the scheme a pseudo-lock-in light-detection system, which enables us to construct the system extremely simply. Experimental results for measuring the fluorescence lifetimes of YAG materials and a fluorescence glass are demonstrated followed by the basic performance test of the scheme.
No takes yet. Share an insight, caveat, or question.
Iwata et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: