Monte Carlo simulations of the solid-liquid transition in hard spheres and colloid-polymer mixtures

Monte Carlo simulations at constant pressure are performed to study coexistence and interfacial properties of the liquid-solid transition in hard spheres and in colloid-polymer mixtures. The latter system is described as a one-component Asakura-Oosawa (AO) model where the polymer's degrees of freedom are incorporated via an attractive part in the effective potential for the colloid-colloid interactions. For the considered AO model, the polymer reservoir packing fraction is eta(p) (r)=0.1 and the colloid-polymer size ratio is q[triple bond]sigma(p)/sigma=0.15 (with sigma(p) and sigma as the diameter of polymers and colloids, respectively). Inhomogeneous solid-liquid systems are prepared by placing the solid fcc phase in the middle of a rectangular simulation box, creating two interfaces with the adjoined bulk liquid. By analyzing the growth of the crystalline region at various pressures and for different system sizes, the coexistence pressure p(co) is obtained, yielding p(co)=11.576 k(B)T/sigma(3) for the hard-sphere system and p(co)=8.00 k(B)T/sigma(3) for the AO model (with k(B) as the Boltzmann constant and T as the temperature). Several order parameters are introduced to distinguish between solid and liquid phases and to describe the interfacial properties. From the capillary-wave broadening of the solid-liquid interface, the interfacial stiffness is obtained for the (100) crystalline plane, giving the values gamma approximately 0.49 k(B)T/sigma(2) for the hard-sphere system and gamma approximately 0.95 k(B)T/sigma(2) for the AO model.