Answers are grounded in this paper and cite their sources.
GaN/InGaN light emitting diodes (LEDs) grown on sapphire substrates have current transport along the lateral direction due to the insulating nature of the substrate. The finite resistance of the n-type GaN buffer layer causes the pn junction current to be nonuniform and “crowd” near the edge of the contact. The current-crowding effect is analyzed both theoretically and experimentally for p-side-up mesa structure GaN/InGaN LEDs. The calculation yields an exponential decay of the current distribution under the p-type contact with a characteristic current spreading length, Ls. It is shown that GaN/InGaN LEDs with high p-type contact resistance and p-type confinement layer resistivity have a relatively uniform current distribution. However, as the p-type GaN conductivity and p-type ohmic contact conductivity is improved, significant current crowding near the contact edge will occur. The current crowding effect is analyzed experimentally in GaN/InGaN LEDs emitting in the blue spectral range. Experimental results show the light intensity decreasing with distance from the contact edge. A current spreading length of Ls=525 μm is found, in good agreement with theory.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: