Answers are grounded in this paper and cite their sources.
The optimal conditions for growth of homoepitaxial InAs layers by molecular beam epitaxy were investigated over a wide range of substrate temperatures and As2/In flux ratios at a growth rate of 0.66 monolayer/s. Material quality was investigated using a variety of techniques: differential interference contrast microscopy, scanning electron microscopy, and atomic force microscopy. The results indicated that the InAs layer grown at a temperature between 430 and 450 °C with an As2/In flux ratio of about 15:1 yielded the highest quality, with a defect density of 2 × 104 cm−2 and a root mean square roughness of 0.19 nm. The quality can be further improved by growth at a lower growth rate of 0.22 monolayer/s. The morphology of large oval hillock defects on the InAs layers suggested that these defects originated at the substrate surface.
No takes yet. Share an insight, caveat, or question.
Ye et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: