Why the study?
What is the optimal combination of electrode type, output capacitor, and pulse width to minimize power consumption in cardiac pacing?
What is the optimal combination of electrode type, output capacitor, and pulse width to minimize power consumption in cardiac pacing?
Using a small surface electrode with a 22 microF output capacitor and 0.5 msec pulse width optimizes power economy in cardiac pacing.
Answers are grounded in this paper and cite their sources.
May reduce power needs in animal pacing models; leaves open translation to human devices.
Three different types of unipolar endocardial electrodes--47 in all--were compared in regard to power consumption at stimulation threshold with six different output capacitors and seven pulse widths. Fifteen were conventional large surface electrodes (area 47 mm2); 18 were conventional small surface electrodes (area 6 mm2), and 14 had a specially designed tip with a large area but small active surface of 8 mm2. Pulse widths ranged from 0.15 to 2.0 msec and output capacitors from 1.0 to 22.0 microFarads. All in all about 2,000 measurements were performed. The average current drain to the pacemaker output stage was measured and power consumption was calculated for each electrode--pulse width--output capacitor combination. In all combinations, the two small surface electrodes consumed approximately the same amount of power and, in both cases, significantly less than the larger one. With regard to power economy at stimulation threshold, the pulse width of choice was about 0.5 msec and, furthermore, power consumption decreased with increasing capacitor size. The optimal combination was a small surface electrode, an output capacitor of 22 microF and a pulse width of 0.5 msec.
No takes yet. Share an insight, caveat, or question.
Edhag et al. (1978) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: