Answers are grounded in this paper and cite their sources.
Temperature-programmed desorption (TPD) is used in conjunction with X-ray photoelectron spectroscopy (XPS) to probe the surface reactivity of water with MgO surfaces prepared by mechanical polishing/acid etching, vacuum annealing in partial pressures of oxygen, high-temperature annealing in an oxygen ambient, and ion sputtering. The structure and morphology of surfaces prepared by these procedures have been previously characterized on the atomic scale with atomic force microscopy. Surfaces prepared using etching procedures and etch and annealing in partial pressures of oxygen demonstrate an atomically rough surface morphology and broad desorption features indicative of an inhomogeneous surface. Surfaces annealed in an oxygen ambient exhibit atomically flat terraces and sharp desorption features. Ar + bombardment at 500 eV of atomically flat MgO surfaces results in broad features appearing in the water desorption spectra. These are attributed to surface vacancies created by the sputtering process, which act as adsorption sites. XPS measurements indicate preferential removal of oxygen during the Ar + bombardment process. Water adsorption or vacuum annealing in partial pressures of O 2 results in the removal of vacancies by dissociative adsorption at defect sites. Subsequent TPD measurements of water result in a desorption spectrum that is identical with that obtained from the initially well-ordered surface. This study demonstrates that the thermal desorption of water from MgO surfaces is indicative of local surface order and provides atomic level insight into the methods of preparing stoichiometric MgO(100) surfaces.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: