Answers are grounded in this paper and cite their sources.
Experimental study demonstrates reliable leveling in quadrotors landing on inclined terrain, highlighting practical stabilization for precision aerial inspection.
This paper presents the design, modelling, control, and experimental validation of a cable-driven telescopic landing system for quadrotor unmanned aerial vehicles operating on uneven terrain. The mechanism uses a 1:1 cable–pulley transmission that doubles effective actuator stroke from 35 mm to 70 mm per leg, while a passive spring-return element removes the need for bidirectional actuation, reducing complexity, weight, and energy consumption. Nonlinear effects due to cable compliance and Coulomb friction are modelled and incorporated into control design. A quasi-static force analysis is used to evaluate actuator requirements, showing a limited but sufficient safety margin under conservative loading conditions. The control architecture combines a one-dimensional Kalman filter for attitude estimation with a PID-based leg adjustment controller, together with a geometric mapping between leg extension and vehicle attitude. A rotor disarm strategy decouples attitude stabilization from ground contact dynamics during touchdown. Experimental validation over 20 consecutive landings on inclined surfaces achieved a 100% success rate. Final attitude errors were 1.2°± 0.7° in pitch and 1.4° ± 0.8° in roll, with a stabilization time of 6.3 ± 2.1 seconds after disarm. Noise analysis indicates that IMU uncertainty contributes less than 7% to total error. Results demonstrate the effectiveness and robustness of the proposed landing system for precision UAV inspection and photogrammetry applications.
No takes yet. Share an insight, caveat, or question.
Leone et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: