Answers are grounded in this paper and cite their sources.
Governed by the second law of thermodynamics, waste heat generation is inevitable and has been a major source of energy loss and environmental concern in human society. Harvesting waste heat into useful energy has thus become a paramount priority, but has remained challenging with efficiency and cost constraints. Thermoelectric generators (TEGs), which convert heat into electricity whenever there is a temperature difference, play a crucial role in waste heat harvesting. However, sustaining the temperature difference for uninterrupted and high-power density electricity generation is a major challenge in TEGs to achieve practical applications due to the thermal equilibrium. Here, we demonstrate a diurnal waste heat harvester by integrating a high-power radiative cooling film as the cool end of TEGs to enable a large and continuous temperature difference. Significant voltage increase from 30.0 mV to 65.7 mV was achieved, leading to a dramatic power density enhancement of 4.8 times from 35.2 mW m − 2 to 168.6 mW m − 2 . In an open zone, an ultra-high power density of 2.76 W m − 2 was achieved at a heat source temperature of 80 °C, exceeding the performance of state-of-the-art radiatively cooled TEGs. More importantly, a portable and foldable thermal energy harvesting prototype composed of 24 TEGs arranged in an array has been constructed. When attached to a hot object (e.g. a car engine hood), it can output 5 V to charge personal electronics (e.g. a cellphone), making it a promising practical device for harvesting waste heat in a wide range of outdoor applications.
No takes yet. Share an insight, caveat, or question.
Hei et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: