Answers are grounded in this paper and cite their sources.
We fabricated a 57 cm long waveguide circuit and an arrayed-waveguide-grating (AWG) demulti/multiplexer using deuterated and fluorinated methacrylate polymers, and examined the influence of environmental change on their transmission characteristics. A 57 cm waveguide with a loss of 0.1 dB/cm at 1.3 µ m exhibited a slight loss increase of 0.03 dB/cm when the humidity was raised from 13 to 98%RH and a negligible loss change when the temperature was increased to 70° C. On the other hand temperature and humidity changes respectively caused wavelength shifts of 0.9 and 5 nm in the transmission peaks of an AWG with an adjacent channel spacing of 0.65 nm. Furthermore we confirmed that the influence of the humidity resulted from water sorption in the waveguide polymers.
No takes yet. Share an insight, caveat, or question.
Hida et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: