Answers are grounded in this paper and cite their sources.
( Ba0.5Sr0.5)TiO3 (BST) thin films have been prepared on Pt/SiO2/Si substrates under various Ar/O2 plasma conditions by the conventional rf magnetron sputtering method using a ceramic target containing excess BaO and SrO. With increasing deposition temperature, the crystallinity of the BST films abruptly increased and change of the preferred orientation was observed. At 650° C, (100)-preferred orientation was obtained. The increase of the crystallinity of films improved the dielectric constant. A 100 nm BST thin film deposited at 650° C with 50% O2 plasma content has a dielectric constant of 725 and a leakage current density of 2.3×10-7 A/cm2 at 2.5 V. In the current-voltage curve of BST film deposited at higher substrate temperature, lower leakage current density in the low bias region and narrower flat region (hopping conduction region) were obtained.
No takes yet. Share an insight, caveat, or question.
Lee et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: