Answers are grounded in this paper and cite their sources.
This paper presents a high-frequency transmissive frequency selective rasorber (FSR) with wideband transmission/ absorption properties. It is synthesized by placing a resistive sheet on top of a bandpass frequency selective surface (FSS) separated by an air spacer. The unit cell of resistive sheet comprises the resistor-loaded central tortuous Jerusalem cross. Its central tortuous cross, acting as a parallel LC resonator with a high inductance and a low capacitance, is utilized to realize a wide pass-band with low insertion loss by cutting off resistive sheet’s lossy path over a wide frequency band. The bandpass FSS adopts a triple-layer coupled structure, in which two layers of identical capacitive metallic patches are coupled through an intermediate inductive wire grid. A second-order pass-band with high selectivity is realized by this bandpass FSS. Simulation results show that the fractional bandwidth of the 1 dB transmission band and the 10 dB absorption band is 19.6% and 107.9%, respectively. Meanwhile, since its periodicity is only 8 mm, the proposed FSR also shows good angular and polarization stabilities. A good agreement between the measured and simulated results validates the proposed FSR design.
No takes yet. Share an insight, caveat, or question.
Sheng et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: