Answers are grounded in this paper and cite their sources.
The development of biomedicine, military and other fields has led to an increasing demand for near‐infrared light sources, and near‐infrared phosphorescent conversion light‐emitting diodes (NIR pc‐LED) occupy a critical position in these fields. However, the problems of weak luminescence intensity and poor thermal stability have generally been exhibited by the near‐infrared fluorescent materials reported to date. This article synthesized a series of Ca3ZrNbGa3O12: Cr3+ phosphors by the high‐temperature solid‐phase method. Under 342 nm excitation, the phosphors produced emission light covering the wavelength range of 650–1150 nm. The luminescence center was 783 nm, corresponding to the 4T2 → 4A2 transition of Cr3+, and the full width at half maximum (FWHM) was 129 nm. Subsequently, with the continuous introduction of Yb3+ into the system, the 2F5/2 → 2F7/2 transition of Yb3+ generates multiple luminescent centers in the near‐infrared region, thereby broadening the spectral coverage range. The incorporation of Yb3+ ions enables efficient energy transfer from Cr3+ to Yb3+ in the system. When the concentration of Yb3+ is 8%, the energy transfer efficiency reaches 64.1%. The Photoluminescence quantum yield (PLQY) was also improved from 41.4% of Ca3ZrNbGa3O12: 0.7% Cr3+ to 69.3% of Ca3ZrNbGa3O12: 0.7% Cr3+, 0.6% Yb3+. The thermal stability at 150°C was also improved from 36.06% to 43.06%. A near‐infrared pc‐LED device was fabricated through the integration of Ca3ZrNbGa3O12: 0.7% Cr3+, 0.6% Yb3+ phosphor with a 365 nm LED chip, thereby validating the material's potential for application as a novel near‐infrared illumination source.
No takes yet. Share an insight, caveat, or question.
Li et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: