Answers are grounded in this paper and cite their sources.
Measurements on Nb3Sn multifilamentary conductors show that normally a degradation of the transition temperature Tcand of the critical current Icoccurs as a result of the compressive strain exerted by the bronze on the Nb3Sn layers when cooling down. When tensile stresses are applied, therefore, an increase of the Icup to a maximum value is observed at first and then the Icbegins to decrease. These compressive strains are favourable factors when the conductor is subjected to tensile and bending loads. A coil reacted after winding produces a flux density of 12 T in a 7.5 T background field. The measured Icvalues were 10 % higher than in short samples. A coil wound with pre-reacted conductors produces a flux density of 13 T in an 8 T background field and, with an insert coil in the 55 mm bore of this magnet, 14.5 T has been measured.
No takes yet. Share an insight, caveat, or question.
Hillmann et al. (1977) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: