Answers are grounded in this paper and cite their sources.
The dynamic magnetostrictive properties of Ni-Fe alloys containing from 35% to 67.5% nickel were investigated to determine their suitability for use in electromechanical transducers. The material, in the form of toroids made from ring laminations, was evaluated by the motional impedance method. Annealing temperatures were varied from 600°C to 1220°C, and the effect of various annealing techniques was investigated. Measured values of the electromechanical coupling coefficient, the reversible permeability, the dynamic magnetostrictive constant, and other parameters are given. The electromechanical coupling coefficient for alloys containing from 40% to 52.5% nickel was greater than 0.31. A maximum value of 0.37 was found for the 40% nickel alloy. The product of the magnetostrictive constant and the reversible permeability for the above range of alloys was greater than 95×104 (dynes/oersted-cm2) and reached a maximum value of approximately 130×104 for the alloy containing approximately 40% nickel.
No takes yet. Share an insight, caveat, or question.
Davis et al. (1957) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: