Answers are grounded in this paper and cite their sources.
To meet the requirement of aircraft turbine engines, require higher operating temperatures in their hot sections to increase overall fuel efficiency while reducing harmful byproducts. To fulfil this, we developed two different kinds of high entropy rare earth disilicates (Dy 0.25 Ho 0.25 Tm 0.25 Yb 0.25 ) 2 Si 2 O 7 or (4RE 0.25 ) 2 Si 2 O 7 and (Y 0.2 Dy 0.2 Er 0.2 Yb 0.2 Ho 0.2 ) 2 Si 2 O 7 or (5RE 0.2 ) 2 Si 2 O 7 by solid-solution method. SEM and XRD were done to check the surface morphology and phase analysis of both high entropy rare earth disilicates. The water vapor test was done to check the resistance of these two materials against water vapor 90%H 2 O-10%O 2 for 150 h at 1300 °C. The (4RE 0.25 ) 2 Si 2 O 7 water vapor result shows better resistance up to 150 h at 1300 °C with a net mass loss value of 0.10 × 10 -5 g/cm 2 . While the (5RE 0.2 ) 2 Si 2 O 7 material also has a much better resistance against water vapor at 1300 °C for 150 h with a very low amount of net mass loss 0.01 × 10 -5 g/cm 2 . The present results highlight the merit of multicomponent high entropy rare earth silicate engineering in advanced EBC material for crucial corrosion resistance improvement in high-temperature engine applications.
No takes yet. Share an insight, caveat, or question.
Abrar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: