Answers are grounded in this paper and cite their sources.
Polylactide (PLA) is one of the potential alternatives for replacing traditional petroleum-based polymers, but its inherent brittleness and poor heat resistance restrict its wider application. Herein, we propose a strategy to simultaneously address these limitations. Stereocomplex crystallites (SCs) formed through the combination of poly( l -lactide) (PLLA) and poly( d -lactide) (PDLA) were introduced, followed by simultaneous in situ orientation of crystallites and the amorphous phase through pressure-induced flow molding (PIF). The introduction of SCs enhanced the heat resistance of PLA. The layer structure formed by in situ-oriented crystallites through PIF processing greatly improved the mechanical properties of PLA. The results manifest that the PLLA/PDLA blends obtained by PIF processing at 140 °C and 200 MPa exhibit impressive heat resistance (the Vicat softening temperature is 169.4 °C) and excellent mechanical properties (the notched Izod impact strength is up to 28.5 kJ/m 2, and the tensile strength is close to 69.9 MPa). The solid–solid transformation of homocrystallization-to-stereocomplexation transformation was realized under the combined effect of the thermal field and pressure flow field instead of solid–liquid–solid transformation under a static thermal field.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: