Answers are grounded in this paper and cite their sources.
Of all polymerization methods, catalytic polymerization offers the broadest scope of microstructure control. Stereo-regularity, comonomer incorporation and sequences, molecular weights, and molecular weight distributions can be controlled by the catalyst structure. [1] Polyolefins are produced on a vast scale of nearly 100 million tons annually, predominantly by catalytic polymerization. High-density polyethylene (HDPE) and isotactic polypropylene are examples. These polymers are hydrocarbons without any heter-oatom-containing functional groups, such as ester moieties. Catalysts employed in industrial polyolefin production are based on early transition metals such as Ti, Zr, Cr, or V. Owing to their high oxophilicity, the polymerization-active metal centers interact strongly with oxygen-or nitrogen-containing moities, rendering them inactive for insertion polymerization. Thus, polar-substituted vinyl monomers H 2 C=CHX, of which vinyl acetate (VA), acrylates, and acrylonitrile (AN) are the major representatives, are homo-and copolymerized by routes other than insertion polymer-ization, usually by free-radical polymerization. Polyolefins containing polar groups are prepared on a large scale in the form of ethylene–VA copolymers by high-pressure free-radical polymerization. Since the discoveries of Ziegler [2] and Natta, [3] the coordination copolymerization of polar-substituted vinyl monomers H 2 C=CHX has been a challenge. Incorporation in polyolefins is of broad interest, for example, to increase interactions with polar surfaces, such as metals, or to achieve stability towards hydrocarbon solvents. A major advance was achieved in the mid-1990s with Brookhart and co-workers studies of olefin polymerization by cationic Ni II and Pd II diimine complexes. [4–7] In comparison to the aforementioned early-transition-metal complexes, these late-transition-metal complexes are much less oxophilic. For the first time, ethylene or 1-olefins were copolymerized with acrylates in a catalytic fashion. [7] Owing to the propensity of the Pd II complexes employed to " chain walk " [4, 8] [Eq. (1)] on the growing chain during polymerization, highly branched amorphous polyethylenes with the acrylate repeat units located predominantly at the ends of branches are obtained (see also Scheme 2). However, in contrast to acrylates, other common como-nomers such as VA, AN, and vinyl chloride (VC) could not be copolymerized by these cationic complexes. Very recently, significant advances have been reported with neutral Pd II catalysts, which are highlighted herein. To rationalize these findings, it is instructive to consider the challenges in the copolymerization of apolar-and polar-substituted olefins (Scheme 1). These have been revealed by recent mechanistic studies, particularly by low-temperature NMR spectroscopy, of the reactivity of cationic species (N^N)PdMe + towards these monomers.
No takes yet. Share an insight, caveat, or question.
Berkefeld et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: