Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene−1-Hexene Copolymer

Ethylene−1-hexene copolymers were synthesized with a tandem catalysis system consisting of a new trimerization catalyst ( 1 ), bis(2-dodecylsulfanylethyl)amine−CrCl 3, and a copolymerization catalyst ( 2 ), Et(Ind) 2 ZrCl 2 . Catalysts 1 and 2 were supported on silica particles, and the effects of different supporting strategies on trimerization selectivity, 1-hexene incorporation efficiency, and copolymerization activity were studied and compared to the homogeneous system. It was found that the supported 1 trimerized ethylene with a similar selectivity (>99%) but one-quarter of the activity of the homogeneous 1 . The supported 2 gave 40% 1-hexene incorporation efficiency and one-third of the copolymerization activity of the homogeneous 2 . The tandem action of the supported 1 and 2 yielded linear low-density polyethylene (LLDPE) materials that contained only C4 side-chains. The dual supported system had activities at a 10 7 g/(mol Zr h) level, in the same order of the homogeneous counterpart. Adjusting the Cr/Zr ratio yielded various branching densities and, thus, melting temperatures of the resulting polymers. The samples prepared with the supported 2 exhibited broad differential scanning calorimetry (DSC) curves, probably due to multiple active sites.