Answers are grounded in this paper and cite their sources.
Objectives Anterior cruciate ligament (ACL) reconstruction is a common surgical procedure, particularly among athletes and especially those involved in sports requiring sudden changes in movement direction. This procedure aims to repair the ACL, a crucial ligament for stabilizing the knee joint. The present study aimed to develop a computational model to investigate the effect of biomechanical parameters associated with ACL reconstruction, primarily focusing on the loads sustained by the ACL. Materials and Methods Based on a CT scan, a computational model of a left knee was developed, including hard tissues (femur, tibia and patella) and soft tissues (ligaments, cartilages and meniscus). A multibody model was designed and implemented to study ACL loads during 90° passive flexion, considering the knee ligaments as mechanical springs. The effects of pre-load, ligament footprint position, and ACL stiffness were analysed in relation to the maximum load sustained by the ACL fixation. Results The results were validated using published data in computational and ex vivo results. The model developed exhibited similar biomechanical behaviour, with a maximum load approximately 5 % higher. A peak load of 208 N was observed at 30° of flexion with a pre-load of 128 N. The ligament footprint position was found to influence the maximum load by approximately 20 %. Conclusions The validated model can be used to analyse additional biomechanical parameters related to ACL reconstruction. ACL stiffness is a key mechanical property affecting the maximum load sustained and is influenced by both pre-load and the ligament’s footprint position on the tibia.
No takes yet. Share an insight, caveat, or question.
Ramos et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: