Answers are grounded in this paper and cite their sources.
Cell design is effective to improve the performances of lithium‐ion batteries (LIBs). For identifying the bottleneck of a full battery used for high‐rate charging/discharging, we developed a simple method, by a reference electrode in practical pouch cells, to quick obtain the polarizations of the cathode and the anode. For a Li(Ni0.6Co0.2Mn0.2)O2/graphite full cell, 63.9% and 97.0% of the polarizations originate from the anode at 50% state of charge (SOC) during 2.0 C charging and discharging rates, respectively. While for LiFePO4/graphite system, 62.5% and 55.8% of the polarizations originate from the anode at the same charging and discharging conditions. These indicate that the anode is the limitation during fast charging/discharging, which is consistent with the common understanding but in contrary to the results obtained by coin cells reported previously. While the rate limitation from anode in LiFePO4/graphite system during fast charging/discharging is significantly changed to both cathode and anode compared with Li(Ni0.6Co0.2Mn0.2)O2/graphite. Besides, graphite anodes in LiFePO4/graphite cells more readily dive to the Li‐metal plating potential at high charging rate. This leads to safety concerns of LiFePO4/graphite cells during fast charging. This is a facile strategy for fast distinguishing polarizations from cathodes and anodes of high‐rate LIBs.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: