Answers are grounded in this paper and cite their sources.
Experimental study demonstrates that niobium microalloying improves hydrogen embrittlement resistance in 34MnB5 steel, indicating effective grain boundary refinement and dislocation reduction.
To investigate the effect of microalloying on hydrogen embrittlement resistance of hot-stamped steels with strength levels of 1.8 GPa and above, six composition schemes were designed based on conventional 34MnB5 steel, including three routes, namely Nb, V, and Nb–V. U-bend constant-strain bending tests and slow strain rate tensile (SSRT) tests were conducted on quenched specimens for each scheme. Results indicated that the Nb-containing compositions exhibited superior hydrogen embrittlement resistance. The mechanism by which microalloying refines the martensitic microstructure of 34MnB5 in the quenched state and enhances its resistance to hydrogen embrittlement was studied in detail. It was found that Nb exhibits stronger effects than V in refining and homogenizing the martensite structure. The fundamental reasons for Nb’s enhanced ability to pin austenite grain boundaries at high temperatures—leading to better microstructural refinement and homogenization—are its higher temperature range for second-phase precipitation, greater driving force for grain boundary diffusion, lower austenite grain boundary diffusion coefficient, and weaker tendency for high-temperature coarsening of precipitates. The microstructural refinement and homogenization induced by Nb addition are more pronounced than those achieved by combined additions of Nb and V. Furthermore, within the concentration range of 0–0.1%, the amount of Nb is positively correlated with the degree of microstructural refinement and homogenization. By reducing martensite lath size through microalloying, multiple microstructural modifications occur: decreased density of geometrically necessary dislocations (GNDs) in the matrix, significant increase in interface density—especially a higher proportion of high-angle grain boundaries—reduced number of Σ3 special harmful grain boundaries, weakened matrix texture intensity, fewer twin martensites, and smaller twin martensite sizes. These factors collectively contribute significantly to the improved hydrogen embrittlement resistance of Nb-containing steels.
No takes yet. Share an insight, caveat, or question.
Feng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: