Answers are grounded in this paper and cite their sources.
By the application of the principle of regeneration to certain modulation systems, a generator of submultiple or other fractional frequency ratio may be obtained. A simple example is obtained by considering a second-order modulator whose output is connected back to a conjugate input by means of a feedback loop including an amplifier and a selective network. If an inputfrequencyfo is applied, it is found that afrequency component f0/2 appearing in the feedback path will modulate with the applied frequency to produce sidebands of f0/2 and 3f0/2. The network and amplifier, being especially efficient for the frequency f0/2 and having a gain higher than the modulator loss, will reinforce this component causing it to build up to some steady-state value. Similar processes are possible by which greater submultiple ratios may be obtained. Since the output wave is obtained by a modulation process involving the input wave, it will appear only when an input is applied and then bears a fixed frequency ratio with respect to it. Experiments show that the ability of the generator to produce a fractional frequency is independent of phase shift in the feedback path. Circuits are possible in which the amplitude of the fractional-frequency wave will bear a linear relation to the input wave over a reasonable range and at the same time maintain a constant phase angle between the two waves. Typical circuits are discussed which make use of copper oxide as the modulator elements.
No takes yet. Share an insight, caveat, or question.
Rodney L. Miller (1939) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: