Answers are grounded in this paper and cite their sources.
This study presents a quantitative investigation into the laser melting behaviour of Ti6Al4V powder during Selective Laser Melting (SLM), employing finite element modelling validated by experimental results. The research evaluates key process parameters – laser power (500–700 W), scanning speed (100–300 mm s–1), and beam diameter (0.2–0.6 mm) – to understand their effects on melt pool geometry and the occurrence of balling defects. A transient, 3D Gaussian heat source model with temperature-dependent absorptivity (0.702) is developed to simulate thermal-fluid behaviour during melting. Experimental validation includes morphological and dimensional analysis of laser tracks using optical microscopy, SEM, and XRD. The average powder size (15 µm) is determined via laser diffraction. A double-track model is further developed to study adjacent laser paths with a 50 µm spacing, assessing thermal overlap and peak temperatures exceeding 2800°C. The numerical model includes a Ti6Al4V substrate (20 × 5 × 3 mm) with two superimposed 50 µm layers. Experiments were conducted using an EOSINT M 280 system in an argon atmosphere. This sequential modelling approach provides insights for optimising multi-track SLM processes, offering benefits for aerospace, biomedical, and automotive applications.
No takes yet. Share an insight, caveat, or question.
Sankar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: