This is the authors' abstract. We don't add key points for this paper.
We proposed a flexible and mask-less approach to directly fabricate a patterned red phosphor layer on a Y3Al5O12:Ce3+ (YAG:Ce3+) phosphor-in-glass (PiG) for high-power white light-emitting diodes (WLEDs). This approach was realized by ultraviolet (UV) assisted and initiative cooling based water condensing. A low-temperature precursor glass matrix with a high refractive index was synthesized for the YAG:Ce3+ PiG. By controlling the UV pre-curing time, the micro-concaves with adjustable sizes were fabricated on the red phosphor layer embedded with UV-curable polymer. With the pre-curing time of 20 s, 30 s, and 40 s, the average aspect ratio of the micro-concave is 1.03, 0.76, and 0.41, respectively. Consequently, the patterned sample achieves a highest luminous efficacy (LE) of 108.5 lm/W at the current of 350 mA, which is 16.2% higher than the unpatterned sample. The corresponding correlated color temperature (CCT) and color rendering index (CRI) are 4831 K and 80.5, respectively. The results demonstrate that the YAG:Ce3+ PiG coated with the water condensing patterned red phosphor layer is a feasible and effective method to enhance the light extraction and color quality of high-power WLEDs.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Peng et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: