Answers are grounded in this paper and cite their sources.
Metal nitride (Ni(0.33)Co(0.67))N nanoparticles are prepared by nitridation using NiCo(2)O(4) as a precursor material by heating at 335 °C for 2 h in flowing NH(3) + N(2) gas and characterized by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), high resolution-transmission electron microscopy (HR-TEM), along with selective area electron diffraction (SAED) and X-ray absorption spectroscopy (XAS) techniques. The X-ray absorption near edge structure (XANES) at the Co K-edge showed that the oxidation state of cobalt is close to 3+. The (Ni(0.33)Co(0.67))N showed a shift in edge energy towards lower values due to Ni-doping to cobalt site. The Li-storage behaviour of (Ni(0.33)Co(0.67))N nanoparticles was evaluated by galvanostatic cycling and cyclic voltammetry in the cells with Li-metal as counter electrode in the voltage range of 0.005-3.0 V at ambient temperature. When cycled at 250 mA g(-1), the first-cycle reversible capacity of 700 (±5) mA h g(-1) (~1.9 moles of Li) is obtained. It showed an initial decrease in capacity until the 10(th) cycle and a stable capacity of 400 (±5) mA h g(-1) (~1.09 moles of Li) is observed at the end of the 50(th) cycle. Excellent rate capability is also shown when cycling at 500 mA g(-1) (up to 50 cycles). The materials showed excellent Li-ion insertion/extraction, with the coulombic efficiency reaching almost 99% in the range of 10-50 cycles. The average charge and discharge potentials are ~2.03 and ~1.0 V, respectively for the decomposition/formation of Li(3)N as determined by electroanalytical techniques.
No takes yet. Share an insight, caveat, or question.
Das et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: