Answers are grounded in this paper and cite their sources.
fluid level registration; column height measurement; height gauge I N THE COMPARISON of plethysmographic methods for meas-uring blood flow (2) it seemed desirable to record outputs from several devices on the same type of equipment. The techniques currently available for converting the level of water in the chimney of the water-filled plethysmograph to an elec-trical signal (I) were not immediately available to us, so we improvised the system described below. Its simplicity and ready availability in most physiology laboratories make it especially useful. It is essential that the transducer impose no restrictions on the free movement of the miniscus in the plethysmograph chimney, i.e., the pressure should remain atmospheric. Shifts in the level of the miniscus are converted to changes in pres-sure by trapping a fixed amount of air in a tube which dips into the water in the chimney (Fig. I). Separation of the sys-tem for pressurization and measurement from the total pres-sure acting in the chimney provides freely adjustable charac-teristics. Thus, increasing the cross-sectional area of the dip tube or minimizing the remainder of the pressure measuring system increases the sensitivity significantly. Such adjustments are not possible in the simpler system of pressure measurement in a large pneumatic buffering volume. A two-hole rubber stopper, fitted into the top of the chimney, holds a piece of 8 Received for publication I 5 November I 965.
No takes yet. Share an insight, caveat, or question.
Hyman et al. (1966) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: