Ammonia Formation over Pd/Rh Three-Way Catalysts during Lean-to-Rich Fluctuations: The Effect of the Catalyst Aging, Exhaust Temperature, Lambda, and Duration in Rich Conditions

The formation of ammonia (NH 3 ) as a byproduct during the operation of a three-way catalyst (TWC) in a simulated exhaust stream was investigated using a commercially available Pd/Rh TWC under steady-state and lean/rich cycling conditions. Ion molecular reaction-mass spectrometry was applied to determine NO, NO 2, and NH 3 concentrations at a time resolution of 0.6 s. Catalyst aging was shown to result in a significant increase in the amount of NH 3 formed, which has received limited attention in the literature to date. The selectivity toward NH 3 formation has been shown to increase with the decrease in the oxygen storage capacity (OSC) of a TWC induced by thermal aging. NH 3 has been shown to mainly form within the exhaust temperature range of 250–550 °C. Typical lambda and rich operational condition duration periods found in vehicle test procedures were also employed to investigate their effects on NH 3 formation. The results suggest that a decrease in the lambda and/or an increase in the duration of rich operating conditions will lead to an increase in the selectivity toward NH 3 formation. Improving the OSC of TWCs and effectively controlling the lambda near to 1.0 with limited duration in rich operating conditions are therefore significant factors in the reduction of NH 3 emissions.