Answers are grounded in this paper and cite their sources.
Link processing with individual laser pulses has become an industry standard process in IC memory chip manufacturing. It is gaining wide acceptance in analog chip reprogramming and tuning as well. Traditional laser processing, using the standard output of Nd:YAG at 1.064-/spl mu/m and Nd:YLF at 1.047-/spl mu/m laser wavelengths, works well for polysilicon links but is not satisfactory for metal links. This paper describes the physics modeling and computer simulation of the laser link process and a new technique of using 1.3-/spl mu/m laser wavelength for the process. While light absorption of link materials at 1.064-, 1.047-, and 1.3-/spl mu/m wavelengths are relatively the same, the absorption of a Si substrate at 1.3 /spl mu/m is considerably less. The improved absorption contrast between the link material and silicon substrate at 1.3-/spl mu/m delivers a much wider laser process window. Both simulation and experimental results are given and discussed. A brief introduction of another new technique, which uses UV laser pulses for link processing, is given. This UV laser process delivers a laser beam spot size much smaller than 1.5 /spl mu/m.
No takes yet. Share an insight, caveat, or question.
Yunlong Sun (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: