Answers are grounded in this paper and cite their sources.
Acrucial aspect of designing medium voltage (MV) converters is the design of the MV inductor, which demands a reliable insulation design that can achieve good performance, manufacturability, modularity, and repeatability. This article shows the design and development of a novel modular medium voltage high-frequency inductor using a matrix-based concept to achieve both the inductance requirement and high-voltage insulation. The concept uses the air gap of the inductor to achieve the required inductance and medium-voltage insulation. The design is carried out using five separate cores and the partial discharge (PD) voltage of 5 kV RMS between the individual core structures is observed experimentally, which translates to a PD voltage of 20 kV for the entire structure. Experimental results in a 20 kW, 10 kV silicon carbide (SiC)mosfet-based converter has been shown to demonstrate the feasibility of the inductor design in high-voltage applications. The medium-voltage matrix inductor design is aimed at providing an air insulated, modular, and easily manufacturable solution to design medium voltage magnetic structures for commercial applications.
No takes yet. Share an insight, caveat, or question.
Anurag et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: