Answers are grounded in this paper and cite their sources.
Elevated silos face seismic damage risks due to their raised mass centers. To mitigate production interruptions and safety accidents caused by collapse failures, this study employs a top isolation system (NRB-UDs) for retrofitting elevated silos. The system combines natural rubber bearings (NRB) with bidirectional U-shaped dampers (UDs), arranged circumferentially between the top of the support frame and the silo stiffening ring. First, a finite element model of the elevated silo is established, using 3D plastic solid elements to simulate the stored material. Displacement loading tests up to 100% shear strain are conducted on the NRB-UDs system to calibrate an equivalent bilinear model; the isolation system is then simulated using parallel Connector elements and Gap elements. Finally, incremental dynamic analysis is performed on both the original and retrofitted structures. Seismic demand parameters are fitted based on the maximum inter-story drift ratio and spectral acceleration S a ( T 1 , 5%), and fragility curves are developed. The results show that the seismic failure of elevated silos is due to premature yielding of the support system and the progressive formation of plastic regions, leading to soft-story behavior. The NRB-UDs system exhibits stable energy dissipation and an equivalent damping ratio. After retrofitting, under a seismic intensity with a 10% probability of exceedance in 50 years, the probability of the structure reaching severe damage is reduced from 97% to 38%. The collapse margin ratio increases from 0.85 to 8.10, with support members remaining elastic, effectively eliminating the soft-story mechanism. The top isolation scheme provides a cost-effective retrofitting strategy for elevated silos.
No takes yet. Share an insight, caveat, or question.
Teng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: