Answers are grounded in this paper and cite their sources.
Clay minerals with a 2:1 structure typically exhibit limited pozzolanic activity after calcination, which constrains their use as supplementary cementitious materials. Mechanical activation has emerged as a promising approach to enhance the reactivity of clays, potentially improving the performance of cement containing mixed clays rich in 2:1 clay minerals. This research assesses the properties of ternary blended cement produced with mechanically activated muscovite-rich mixed clay (LMC 2 -MM) in comparison to limestone calcined clay cement containing either calcined muscovite-rich mixed clay (LC 3 -CM) or metakaolin (LC 3 -MK). Results from pozzolanic activity tests (R 3 and modified Chapelle) revealed a significant improvement in the reactivity of muscovite-rich mixed clay via mechanical activation (MM) compared to thermal activation (CM). LMC 2 -MM exhibited similar structure and properties to conventional LC 3 -MK, and the enhanced reactivity of MM over CM led to improved properties for LMC 2 -MM compared to LC 3 -CM. The hydration of LMC 2 -MM was superior to that of LC 3 -CM, achieving significantly refined porosity at both 3 and 28 days. This study presents a novel approach to ternary blended cement by incorporating mechanically activated mixed clay. It demonstrates that mechanical activation enhances the properties of blended cement, particularly at early ages when using muscovite-rich clays, achieving compressive strength comparable to conventional LC 3 with metakaolin. The mechanical activation of muscovite-rich mixed clay presents a promising strategy for using local clay resources in regions where kaolinite-rich clay is scarce.
No takes yet. Share an insight, caveat, or question.
Mañosa et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: