Answers are grounded in this paper and cite their sources.
Within this work, the emitter-effect of barium is investigated in a high-pressure-sodium (HPS) lamp. The emitter-effect reduces the thermal stress of the lamp electrode by a reduction in the effective work-function of the tungsten material. The investigated HPS-lamp has a special design of the Ba-emitter storage: it is deposited during lamp production in a tungsten coil around the electrode rod with a certain distance to the electrode tip. During lamp operation the Ba-emitter diffuses along the electrode surface to the electrode tip. To optimize the Ba-diffusion along the electrode, a measurement of the Ba-vapour density close to the electrode is executed by means of a broadband absorption spectroscopy (BBAS) at a Ba resonance line. An ultra-high-pressure (UHP) lamp is used as an absorption backlight source. It provides a high radiance at the measuring wavelength and operates very stably over time. An approximately linear decrease in the Ba-vapour density close to the electrode rod from 1.5 × 10 12 to 0.5 × 10 12 cm −3 is measured between the coil and the tip. The UHP-broadband absorption measurement at the Ba resonance line yields results which are independent of the plasma temperature. It can be applied to any arbitrary position within the HPS-lamp. Thus, the presented BBAS by means of a UHP-lamp is a very flexible but simple alternative to laser-absorption spectroscopy or to emission spectroscopy.
No takes yet. Share an insight, caveat, or question.
Westermeier et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: