This is the authors' abstract. We don't add key points for this paper.
In this communication, a single-layered (resistive ink-dielectric-metal based) wide-band frequency selective surface microwave absorber using a unique pattern of resistive ink is presented analytically and experimentally for the reduction of radar cross section (RCS) in stealth technology. As compared to multilayer designs, single layer designs are more easy to deploy in practical applications like stealth technology. Further in contrast to other options, resistive ink has numerous benefits, including consistent wideband absorption, uniform resistance distribution, low cost, and material flexibility. In this work four-fold symmetric topology based on resistive ink is imprinted using screen printing technology on a copper-backed FR-4 dielectric substrate to yield polarization insensitive response. Absorptivity over 90 % has achieved over the frequency range of 17.2–26.5 GHz, associated to a fractional bandwidth of 42.5 % for normal incidence of electromagnetic (EM) wave with two absorption peaks at 19.4 GHz and 22.9 GHz covering the K U and K bands. In the entire band, more than 20 dB monostatic RCS reduction is obtained with a maximum RCS reduction of 38 dB at 22.9 GHz. Current distribution on the upper and lower surface, along with the induced electric fields at absorption peaks, and equivalent circuits have presented to examine the absorption mechanism. The proposed design is evaluated for transverse electric (TE) and transverse magnetic (TM) waves under oblique incidence, and for varying polarization angles in TE and TM mode, demonstrating wide angular stability. A prototype has been fabricated, and the measured outcomes are compared and validated against the simulation results. The novelty of the proposed absorber lies in its distinctive single layer λ 1 /11 ( λ 1 corresponding to the lower absorbing frequency) thin topology made from resistive ink, which shows polarization insensitivity and wide angular stability. All the above-mentioned attributes along with 18 % fractional bandwidth of 20 dB RCS reduction make it commercially appropriate for RCS reduction in stealth applications.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Sandiman et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: