Answers are grounded in this paper and cite their sources.
Internal cyclones use diplegs to recycle solids to the dense fluidized bed in most industrial fluidized beds. Poor dipleg operation can greatly increase particle losses from cyclones. Experiments with a 0.6 m diameter column and large group A particles showed that at low gas velocities in the fluidized bed, gas slugs rose through the dipleg, causing the emission of solids pulses; this issue was resolved by adding an elbow termination at the bottom of the dipleg. At high gas velocities, the dipleg backed up. A new model showed that dipleg backup resulted from large pressure fluctuations in the fluidized bed near the bottom of the dipleg. Momentarily, the local bed pressure became higher than the pressure in the dipleg, and fluidized solids flowed from the bed into the dipleg. Consequently, the dipleg was modified: the dipleg diameter and height were increased, and aeration and an elbow termination were added to the dipleg.
No takes yet. Share an insight, caveat, or question.
Godin et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: