This is the authors' abstract. We don't add key points for this paper.
Heavy alkali metal treatment is a key factor to approach high efficiency in Cu(In, Ga)Se2 (CIGS) solar cells. Here, we show that the Cs-induced surface modification on CIGS thin-film solar cells, especially on grain boundary reconstruction generated from cesium fluoride post-deposition treatment (CsF-PDT). The CsInSe2 phase can be synthesized by CsF-PDT process without extra assistant species, and specifically favors grain boundaries (GBs), which was further characterized by FE-EPMA, TEM, and SIMS analysis. The Cs-contained GBs may both create the valence-band downshift and conduction-band upward. By controlling the Cs-contained layer thickness and modifying absorber, the spike at conduction-band can be overcome by tunneling while remaining high valence-band downshift to suppress the GBs recombination. The efficiency was improved from 15.1 to 18.3% after CsF-PDT; the voltage loss of Eg/q–Voc was down below 0.4 V. Those improvements are mainly contributed from the grain boundary reconstruction at the junction area using CsF-PDT to reduce the recombination.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: